View SST-90_7485239.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

applications ? replacement lamps ? architectural lighting ? retail lighting ? residential lighting ? consumer portable ? spot lighting ? high bay lighting ? wide area lighting ? street lighting ? medical lighting ? emergency vehicle lighting ? displays and signage features: ? extremely high optical output: over 2,100 white lumens over 500 red lumens over 950 green lumens over 200 blue lumens ? extremely high efciency: over 100 lumens per watt at 3.15a for white ? high thermal conductivity package - junction to case thermal resistance of only 0.64 c/w ? large, monolithic chip with uniform emitting area of 9 mm 2 ? lumen maintenance of greater than 70% after 60,000 hours ? environmentally friendly: rohs compliant ? variable drive currents: less than 1 a through 9 a ? high reliability ? electrically isolated thermal path table of contents technology overview ...... 2 test specifcations ......... 2 white binning structure .... 3 white chromaticity bins .... 4 monochromatic binning structure ................... 8 product shipping & labeling information ....... 9 electrical characteristics . 10 SST-90 w lifetime & lumen maintenance ............. 11 spectral characteristics . . . 11 SST-90- rgb electrical characteristics ........... 12 radiation patterns ....... 17 thermal resistance ...... 17 mechanical dimensions .. 18 solder profle ............ 20 ordering information .... 21 1 pds-001342rev 09 ? 2011 luminus devices, inc. - all rights reserved luminus devices, inc. ? t 978.528.8000 ? www.luminus.com 1100 technology park drive ? billerica, ma 01821 SST-90 leds SST-90 product datasheet
testing temperature luminus core board products are typically measured in such a way that the characteristics reported agree with how the devices will actually perform when incorporated into a system. this measurement is accomplished by mounting the devices on a 40oc heat sink and allowing the device to reach thermal equilibrium while fully powered. only after the device reaches equilibrium are the measurements taken. this method of measurement ensures that luminus big chip leds perform in the feld just as they are specifed. luminus surface mount leds are typically tested with a 20msec input pulse and a junction temperature of 25oc. expected fux values in real world operation can be extrapolated based on the information contained within this product data sheet. multiple operating points (3.15, 6.3, 9.0 a) the tables on the following pages provide typical optical and electrical characteristics. since the leds can be operated over a wide range of drive conditions (currents from less than 1.0 a to 9.0 a, and duty cycle from <1% to 100%), multiple drive conditions are listed. SST-90 leds are production tested at 3.15 a. the values shown at other 6.3 a and 9.0 a are for additional reference at other possible drive conditions. understanding big chip led test specifcations every luminus led is fully tested to ensure that it meets the high quality standards expected from luminus products. 2 pds-001342rev 09 ? 2011 luminus devices, inc. - all rights reserved luminus devices, inc. ? t 978.528.8000 ? www.luminus.com 1100 technology park drive ? billerica, ma 01821 SST-90 product datasheet photonic lattice technology luminus photonic lattice technology enables large area led chips with uniform brightness over the entire led chip surface. the optical power and brightness produced by these large monolithic chips enable solutions which replace arc and halogen lamps where arrays of traditional high power leds cannot. for red, green and blue leds, the photonic lattice structures extract more light and create radiation patterns that are more collimated than traditional leds. having higher collimation from the source increases optical collection efciencies and simplifes optical designs. packaging technology thermal management is critical in high power led applications. with a thermal resistance from junction to case of 0.64o c/w. luminus SST-90 leds have the lowest thermal resistance of any led on the market. this allows the led to be driven at higher current densities while maintaining a low junction temperature, thereby resulting in brighter solutions and longer lifetimes. reliability designed from the ground up, luminus big chip leds are one of the most reliable light sources in the world today. big chip leds have passed a rigorous suite of environmental and mechanical stress tests, including mechanical shock, vibration, temperature cycling and humidity, and have been fully qualifed for use in extreme high power and high current applications. with very low failure rates and median lifetimes that typically exceed 60,000 hours, luminus big chip leds are ready for even the most demanding applications. environmental benefts luminus leds help reduce power consumption and the amount of hazardous waste entering the environment. all big chip led products manufactured by luminus are rohs compliant and free of hazardous materials, including lead and mercury. technology overview luminus big chip leds? beneft from a suite of innovations in the felds of chip technology, packaging and thermal management. these breakthroughs allow illumination engineers and designers to achieve solutions that are high brightness and high efciency.
3 pds-001342rev 09 ? 2011 luminus devices, inc. - all rights reserved luminus devices, inc. ? t 978.528.8000 ? www.luminus.com 1100 technology park drive ? billerica, ma 01821 SST-90 product datasheet SST-90 white binning structure SST-90 white leds are tested for luminous fux and chromaticity at a drive current of 3.15 a (350 ma/mm 2 ) and placed into one of the following luminous fux (ff) and chromaticity (ww) bins: chromaticity bins luminus standard chromaticity bins: 1931 cie curve *note: luminus maintains a +/- 6% tolerance on fux measurements. 6500 k 5700 k 5000 k 4500 k 4000 k 3500 k 3000 k 2700 k 0.470 0.445 0.420 0.395 0.370 0.345 0.320 0.295 0.270 0.275 0.300 ciex 0.325 0.350 0.37 50 .400 0.425 0.450 0.475 0.500 ciey bb locus de ef eh ek en eq es eu ew w4 y4 y3 w3 u4 v4 v3 u3 s4 s3 t4 t3 dt dv dy q4 r4 q3 r3 dr n4 p4 n3 p3 dp k4 m4 k3 m3 dm h4 j4 h3 j3 dj f4 g4 g3 f3 df dg flux bin (ff) minumum flux (lm) @ 3.15a maximum flux (lm) @ 3.15a l2 630 665 l3 665 700 m 700 850 m2 750 800 m3 800 850 n 850 1,000 n2 900 950 n3 950 1,000 flux bins
4 pds-001342rev 09 ? 2011 luminus devices, inc. - all rights reserved luminus devices, inc. ? t 978.528.8000 ? www.luminus.com 1100 technology park drive ? billerica, ma 01821 the following tables describe the four chromaticity points that bound each chromaticity bin. chromaticity bins are grouped together based on the color temperature. SST-90 product datasheet 6500k chromaticity bins bin code (ww) ciex ciey dg 0.307 0.311 0.322 0.326 0.323 0.316 0.309 0.302 f3* 0.305 0.321 0.313 0.329 0.315 0.319 0.307 0.311 f4* 0.303 0.330 0.312 0.339 0.313 0.329 0.305 0.321 g3* 0.313 0.329 0.321 0.337 0.322 0.326 0.315 0.319 g4* 0.312 0.339 0.321 0.348 0.321 0.337 0.313 0.329 ef 0.302 0.335 0.320 0.354 0.321 0.348 0.303 0.330 de 0.283 0.304 0.303 0.330 0.307 0.311 0.289 0.293 df 0.289 0.293 0.307 0.311 0.309 0.302 0.293 0.285 5700k chromaticity bins bin code (ww) ciex ciey dj 0.322 0.324 0.337 0.337 0.336 0.326 0.323 0.314 h3* 0.321 0.335 0.329 0.342 0.329 0.331 0.322 0.324 h4* 0.321 0.346 0.329 0.354 0.329 0.342 0.321 0.335 j3* 0.329 0.342 0.337 0.349 0.337 0.337 0.330 0.331 j4* 0.329 0.354 0.338 0.362 0.337 0.349 0.329 0.342 eh 0.320 0.352 0.338 0.368 0.338 0.362 0.321 0.346 *sub-bins within ansi defned quadrangles per ansi c78.377-2008
5 pds-001342rev 09 ? 2011 luminus devices, inc. - all rights reserved luminus devices, inc. ? t 978.528.8000 ? www.luminus.com 1100 technology park drive ? billerica, ma 01821 SST-90 product datasheet 5000k chromaticity bins bin code (ww) ciex ciey ek 0.338 0.368 0.356 0.384 0.355 0.376 0.338 0.362 k3* 0.337 0.349 0.345 0.355 0.345 0.343 0.337 0.337 k4* 0.338 0.362 0.347 0.369 0.345 0.355 0.337 0.349 m3* 0.345 0.355 0.353 0.349 0.352 0.372 0.344 0.343 m4* 0.346 0.369 0.355 0.376 0.353 0.362 0.345 0.355 dm 0.337 0.337 0.352 0.349 0.350 0.337 0.336 0.326 4500k chromaticity bins bin code (ww) ciex ciey en 0.356 0.384 0.376 0.396 0.374 0.387 0.355 0.374 n3* 0.353 0.360 0.361 0.366 0.359 0.352 0.351 0.347 n4* 0.355 0.374 0.364 0.381 0.361 0.366 0.353 0.360 p3* 0.361 0.366 0.370 0.373 0.367 0.358 0.359 0.352 p4* 0.364 0.381 0.374 0.387 0.370 0.373 0.361 0.366 dp 0.351 0.347 0.367 0.358 0.364 0.346 0.350 0.335 *sub-bins within ansi defned quadrangles per ansi c78.377-2008
6 pds-001342rev 09 ? 2011 luminus devices, inc. - all rights reserved luminus devices, inc. ? t 978.528.8000 ? www.luminus.com 1100 technology park drive ? billerica, ma 01821 SST-90 product datasheet 4000k chromaticity bins bin code (ww) ciex ciey eq 0.376 0.396 0.404 0.414 0.401 0.404 0.374 0.387 q3* 0.370 0.373 0.382 0.380 0.378 0.365 0.367 0.358 q4* 0.374 0.387 0.387 0.396 0.382 0.380 0.370 0.373 r3* 0.382 0.380 0.395 0.388 0.390 0.372 0.378 0.365 r4* 0.387 0.396 0.401 0.404 0.395 0.388 0.382 0.380 dr 0.367 0.358 0.390 0.372 0.386 0.359 0.364 0.346 3500k chromaticity bins bin code (ww) ciex ciey es 0.403 0.411 0.435 0.427 0.430 0.417 0.400 0.402 s3* 0.394 0.385 0.407 0.392 0.402 0.375 0.389 0.369 s4* 0.400 0.402 0.415 0.409 0.407 0.392 0.394 0.385 t3* 0.407 0.392 0.422 0.399 0.415 0.381 0.402 0.375 t4* 0.415 0.409 0.430 0.417 0.422 0.399 0.407 0.392 dt 0.389 0.369 0.415 0.381 0.409 0.369 0.385 0.357 *sub-bins within ansi defned quadrangles per ansi c78.377-2008
7 pds-001342rev 09 ? 2011 luminus devices, inc. - all rights reserved luminus devices, inc. ? t 978.528.8000 ? www.luminus.com 1100 technology park drive ? billerica, ma 01821 SST-90 product datasheet 3000k chromaticity bins bin code (ww) ciex ciey eu 0.435 0.427 0.462 0.437 0.456 0.426 0.430 0.417 u3* 0.422 0.399 0.434 0.403 0.426 0.385 0.415 0.381 u4* 0.430 0.417 0.443 0.421 0.434 0.403 0.422 0.399 v3* 0.434 0.403 0.447 0.408 0.437 0.389 0.426 0.385 v4* 0.443 0.421 0.456 0.426 0.447 0.408 0.434 0.403 dv 0.415 0.381 0.437 0.389 0.431 0.377 0.409 0.369 2700k chromaticity bins bin code (ww) ciex ciey ew 0.462 0.437 0.488 0.444 0.481 0.432 0.456 0.426 w3* 0.447 0.408 0.458 0.410 0.448 0.392 0.437 0.389 w4* 0.456 0.426 0.469 0.429 0.458 0.410 0.447 0.408 y3* 0.458 0.410 0.70 0.413 0.459 0.394 0.448 0.392 y4* 0.469 0.429 0.481 0.432 0.470 0.413 0.458 0.410 dy 0.437 0.389 0.459 0.394 0.452 0.382 0.431 0.377 *sub-bins within ansi defned quadrangles per ansi c78.377-2008
8 pds-001342rev 09 ? 2011 luminus devices, inc. - all rights reserved luminus devices, inc. ? t 978.528.8000 ? www.luminus.com 1100 technology park drive ? billerica, ma 01821 SST-90 product datasheet SST-90 rgb bins structure SST-90 rgb leds are specifed for luminous fux and wavelength at a drive current of 3.15 a (0.35 a/mm 2 ) and placed into one of the following luminous fux (ff) and wavelength (ww) bins: note 1: luminus maintains a +/- 6% tolerance on fux measurements. note 2: only specifc bins are available for large order, contact luminus sales team for more information. color luminous flux bin (ff) minimum flux (lm) @ 3.15a maximum flux (lm) @ 3.15a red bg 275 350 bh 350 475 green cf 640 775 cg 775 940 blue de 90 120 df 120 160 dg 160 200 flux bins color wavelength bin (ff) minimum wavelength @ 3.15a maximum wavelength @ 3.15a red r2 611 615 r3 615 619 r4 619 623 r5 623 627 r6 627 631 r7 631 635 green g2 510 515 g3 515 520 g4 520 525 g5 525 530 g6 530 535 g7 535 540 g8 540 545 blue b4 450 455 b5 455 460 b6 460 465 b7 465 470 b8 470 475 wavelength bins
9 pds-001342rev 09 ? 2011 luminus devices, inc. - all rights reserved luminus devices, inc. ? t 978.528.8000 ? www.luminus.com 1100 technology park drive ? billerica, ma 01821 note 1: wnnx nomenclature corresponds to the following: w = white nn = color temperature, where: 65 corresponds to 6500k x = color rendering index, where: s (standard) corresponds to a typical cri of 70 example 1: the part number SST-90-w65s-f11-n3-g4 refers to a 6500k standard cri white, SST-90 emitter, with a fux range from 950 to 1,000 lumens and a chromaticity value within the box defned by the four points (0.313, 0.338), (0.321, 0.348), (0.322, 0.336), (0.312, 0.328). product family chip area color package confguration flux bin chromaticity bin surface mount (lens) 9.0 mm 2 cct & cri see note 1 below internal code see page 3 for bins see page 4-7 for bins sst 90 wnnx f11 ff ww SST-90 product datasheet product shipping & labeling information all SST-90 products are packaged and labeled with their respective bin as outlined in the tables and charts from pages 3 to 8. when shipped, each package will only contain one bin. the part number designation is as follows: sst 90 x f11 ff ww product family chip area color package confguration flux bin wavelength bin surface mount (lens) 9.0 mm 2 r: red g: green b: blue internal code see page 8 for bins see page 8 for bins example2: the part number SST-90-r-c11-bj-r4 refers to a red, SST-90 surface mount, with a fux range of 475-600 lumens and a wavelength range of 619 nm to 623 nm. note 2: some fux and chromaticity/ wavelength bins may have limited availability. application specifc bin kits, consisting of multiple bins, may be available. for ordering information, please refer to page 21 and reference the pds-001692: SST-90 binning & labeling document.
optical and electrical characteristics (t j = 25 oc) drive condition 2 3.15 a 9.0 a parameter symbol values at test currents typical values at indicated current 3 unit current density j 0.35 1.0 a/mm 2 forward voltage v f, min 2.5 v v f, typ 3.25 3.87 v v f, max 3.9 v note 1: listed drive conditions are typical for common applications. SST-90 white devices can be driven at currents ranging from <1a to 9a and at duty cycles ranging from <1% to 100%. drive current and duty cycle should be adjusted as necessary to maintain the junction temperature desired to meet application lifetime requirements. note 2: unless otherwise noted, values listed are typical. note 3: forward voltage temperature coefcient at 3.15a. contact luminus for value at other drive conditions. note 4: SST-90 white devices are designed for operation to an absolute maximum forward drive current 9a. product lifetime data is specifed at recommended forward drive currents. sustained operation at absolute maximum currents will result in a reduction of device lifetime compared to recommended forward drive currents. actual device lifetimes will also depend on junction temperature. refer to apn-001522: reliability application note for SST-90-w for further information. in pulsed operation, rise time from 10-90% of forward current should be larger than 0.5 microseconds. note 5: lifetime dependent on led junction temperature . thermal calculations based on input power and thermal management system should be performed to ensure t j is maintained below t jmax rating or life will be reduced. refer to apn-001522 for further information. note 6: cie measurement uncertainty for white devices is estimated to be +/- 0.01. note 7: special design considerations must be observed for operation under 1a. please contact luminus for further information. note 8: caution must be taken not to stare at the light emitted from these leds. under special circumstances, the high intensity could damage the eye. absolute maximum ratings parameter symbol values unit maximum current 5 9.0 a maximum reverse current n/a maximum junction temperature 6 t j-max 150 oc storage temperature range -40/+100 oc common characteristics parameter symbol values unit viewing angle 2 1/2 100 emitting area 9.0 mm 2 emitting area dimensions 3 x 3 mmmm forward voltage temperature coefcient 4 -2.45 mv/oc electrical characteristics 1 10 pds-001342rev 09 ? 2011 luminus devices, inc. - all rights reserved luminus devices, inc. ? t 978.528.8000 ? www.luminus.com 1100 technology park drive ? billerica, ma 01821 SST-90 product datasheet
luminus devices, inc. ? t 978.528.8000 ? www.luminus.com 1100 technology park drive ? billerica, ma 01821 SST-90 product datasheet 11 pds-001342rev 09 ? 2011 luminus devices, inc. - all rights reserved note 1: yellow squares indicate typical operating conditions. note 2: mean expected lifetime in dependence of junction temperature at 0.35 a/mm 2 in continuous operation. lifetime defned as time to 70% of initial intensity. based on lifetime test data of uncoated gan devices at this time. data can be used to model failure rate over typical product lifetime (contact luminus for lifetime reliability test data for 1a/mm 2 condition). note 3: lumen maintenance in dependence of time at 0.35 a/mm 2 in continuous operation with junction temperatures of 100 oc. note 4: typical spectrum at current density of 0.35 a/mm 2 in continuous operation. relative output flux vs. forward current 1 forward current vs. forward voltage mean lifetime 2 lumen maintenance vs. time 3 0 20 40 60 80 100 120 140 160 1,000 10,000 100,000 de vi ce junction te mper ature (c) median lifetime extr apolation (hours) 0% 50% 100% 150% 200% 250% 300% 0.0 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 re lative luminous flux (%) forward current (a) 0.0 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 2.5 2.7 2.9 3.1 3.3 3.5 3.7 3.9 4.1 forward current (a) forward vo ltage (v) 0 0.2 0.4 0.6 0.8 1 1.2 100 1,000 10,000 100,000 lumen maintenance t ime (hours) measured extrapolated l7 0 typical relative spectral power 4 current derating curve 0% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% 400 450 500 550 600 650 700 750 re lative spectral po wer distribution (%) wa velength (nm) 6500k cct 4500k cct 3000k cct 0 1 2 3 4 5 6 7 8 9 10 0 20 40 60 80 100 120 140 led drive current (a) ambient t emper ature (c) rth j-a = 1.82 c/w rth j-a = 2.00 c/w rth j-a = 3.00 c/w rth j-a = 4.00 c/w
12 pds-001342rev 09 ? 2011 luminus devices, inc. - all rights reserved luminus devices, inc. ? t 978.528.8000 ? www.luminus.com 1100 technology park drive ? billerica, ma 01821 SST-90 product datasheet optical & electrical characteristics red drive condition 2 3.2 a continuous 6.3 a continous parameter symbol values 3 unit current density j 0.35 0.7 a/mm 2 forward voltage v f min tbd - v v f 2.0 2.2 v v f max tbd - v luminous flux 4 v typ 400 640 lm dominant wavelength 5 d 624 624 nm fwhm ? 1/2 16 19 nm chromaticity coordinates 6,7 x 0.695 0.699 - y 0.305 0.301 - relative output flux vs. forward current 1 0% 25% 50% 75% 100% 125% 150% 175% 200% 225% 250% 0 1 2 3 4 5 6 7 v i f (a) forward current vs. forward voltage 0 1 2 3 4 5 6 7 0 0.5 1 1.5 2 2.5 i f (a) v f (v) yellow squares indicate reference drive conditions notes: see page 15
13 pds-001342rev 09 ? 2011 luminus devices, inc. - all rights reserved luminus devices, inc. ? t 978.528.8000 ? www.luminus.com 1100 technology park drive ? billerica, ma 01821 SST-90 product datasheet green drive condition 2 3.15 a continuous 6.3 a continous parameter symbol values 3 unit current density j 0.35 0.7 a/mm 2 forward voltage v f min tbd v v f 3.4 3.7 v v f max tbd v luminous flux 4 v typ 855 1485 lm dominant wavelength 5 d 537 533 nm fwhm ? 1/2 35 38 nm chromaticity coordinates 6,7 x 0.205 0.175 - y 0.740 0.730 - relative output flux vs. forward current 1 0% 25% 50% 75% 100% 125% 150% 175% 200% 0 1 2 3 4 5 6 7 v i f (a) forward current vs. forward voltage 0 1 2 3 4 5 6 7 0 1 2 3 4 i f (a) v f (v) yellow squares indicate reference drive conditions notes: see page 15 optical & electrical characteristics
14 pds-001342rev 09 ? 2011 luminus devices, inc. - all rights reserved luminus devices, inc. ? t 978.528.8000 ? www.luminus.com 1100 technology park drive ? billerica, ma 01821 SST-90 product datasheet blue drive condition 2 3.15 a continuous 6.3 a continous parameter symbol values 3 unit current density j 0.35 0.7 a/mm 2 forward voltage v f min tbd v v f 3.4 3.6 v v f max tbd v luminous flux 4 v typ 180 315 lm dominant wavelength 5 d 465 464 nm fwhm ? 1/2 21 24 nm chromaticity coordinates 6,7 x 0.142 0.142 0.142 y 0.036 0.038 0.038 relative output flux vs. forward current 1 0% 25% 50% 75% 100% 125% 150% 175% 200% 0 1 2 3 4 5 6 7 v i f (a) forward current vs. forward voltage 0 1 2 3 4 5 6 7 0 1 2 3 4 i f (a) v f (v) yellow squares indicate reference drive conditions notes: see page 15 optical & electrical characteristics
15 pds-001342rev 09 ? 2011 luminus devices, inc. - all rights reserved luminus devices, inc. ? t 978.528.8000 ? www.luminus.com 1100 technology park drive ? billerica, ma 01821 SST-90 product datasheet absolute maximum ratings common characteristics symbol red green blue unit emitting area 9.0 9.0 9.0 mm 2 emitting area dimensions 3.0 x 3.0 3.0x3.0 3.0 x 3.0 mmxmm dynamic resistance dyn 0.03 0.04 0.02 thermal coefcient of photometric flux -0.96 -0.18 -0.007 %/ oc thermal coefcient of radiometric flux -0.52 -0.20 -0.17 %/ oc thermal coefcient of junction voltage -1.3 -4.6 -3.5 mv/ oc note 1: SST-90 rgb leds are designed for operation to an absolute maximum current as specifed above. product lifetime data is specifed at recommended forward drive currents. sustained operation at or beyond absolute maximum currents will result in a reduction of device life ime compared to recommended forward drive currents. actual device lifetimes will also depend on junction temperature. refer to the lifetime derating curves for further information. in pulsed operation, rise time from 10-90% of forward current should be larger than 0.5 microseconds. note 2: lifetime dependent on led junction temperature. input power and thermal system must be properly managed to ensure lifetime. see charts on pg 16 for further information. symbol red green blue unit maximum current 27 27 27ss a maximum junction temperature t jmax 125 150 150 oc storage temperature range -40/+100 -40/+100 -40/+100 oc optical & electrical characteristics notes note 1: all ratings are based on a junction test temperature t j = 25oc. see thermal resistance section for t j defnition. note 2: listed drive conditions are typical for common applications. SST-90 rgb devices can be driven at currents ranging from <1 a to 6.3 a and at duty cycles ranging from 1% to 100%. drive current and duty cycle should be adjusted as necessary to maintain the junction temperature desired to meet application lifetime requirements. note 3: unless otherwise noted, values listed are typical. devices are production tested and specifed at 0.35ma. other values are for reference only. note 4: total fux from emitting area at listed dominant wavelength. reported performance is included to show trends for a selected power level. for specifc minimum and maximum values, use bin tables. for product roadmap and future performance of devices, contact luminus. note 5: minimum and maximum dominant wavelengths are based on typical values +/- 5nm for red, +/- 8nm for green and +/- 6nm for blue. note 6: in cie 1931 chromaticity diagram coordinates, normalized to x+y+z=1. note 7: for reference only.
16 pds-001342rev 09 ? 2011 luminus devices, inc. - all rights reserved luminus devices, inc. ? t 978.528.8000 ? www.luminus.com 1100 technology park drive ? billerica, ma 01821 SST-90 product datasheet light output and spectral characteristics over heat sink temperature note 13. median lifetime estimate as a function of junction temperature at 0.35a/mm 2 in continuous operation. lifetime defned as time to 70% of initial intensity. based on preliminary lifetime test data. data can be used to model failure rate over typical product lifetime. note 14. lumen maintenance vs. time at 0.35a/mm 2 in continuous operation, red junction temperature of 70oc, green junction temperatures of 120oc, blue junction temperatures of 100oc. note 15. typical spectrum at current density of 0.35 a/mm 2 in continuous operation. median lifetime estimate vs. t j 13 lumen maintenance 14 typical spectrum 15 relative flux vs. junction temperature 0 20 40 60 80 100 120 140 160 1,000 10,000 100,000 de vi ce junction te mper ature (c) median lifetime estimate (hours) 40% 50% 60% 70% 80% 90% 100% 110% 120% 20 30 40 50 60 70 80 90 relative luminous flux (%) heat sink t emper ature -1.5 -1 -0.5 0 0.5 1 1.5 2 2.5 3 20 30 40 50 60 70 80 90 relative dominant wa velength shift (nm) heat sink t emper ature 0% 20 % 40 % 60 % 80 % 100% 120% 10 01 , 000 10 ,0 00 100 ,0 00 ti me (h ou rs ) lume n ma inte na nce (% ) me as ur ed ex tr apol at ed l7 0 l5 0 0 0.2 0.4 0.6 0.8 1 1.2 400 450 500 550 600 650 700 relative spectra l po wer distribution w avelength (nm) 0% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% 25 50 75 100 125 150 re lative luminous flux (%) junction t emperature (c)
17 pds-001342rev 09 ? 2011 luminus devices, inc. - all rights reserved luminus devices, inc. ? t 978.528.8000 ? www.luminus.com 1100 technology park drive ? billerica, ma 01821 SST-90 product datasheet thermal resistance typical thermal resistance r j-c 1 0.64 oc/w r j-b 1 2.02 oc/w r j-hs 2 2.15 oc/w note 1: thermal resistance values are based on fea model results correlated to measured r j-hs data. note 2: thermal resistance is measured using a sac305 solder, a bergquist al-clad mcpcb, and egraf 1205 thermal interface material. t hs denition = 3 mm from core-boar d t j t c t hs die junc tion wi ndow fr ame ce ramic substrat e aluminum co re b oar d heat sink t b dome typical radiation patterns typical polar radiation pattern for white typical angular radiation pattern for white 30 60 300 330 100% 120% 60% 80% 20% 40% -20% 0% -60% -40% -100% -80% -120% 0% 20% 40% 60% 80% 100% 120% -90 -75 -60 -45 -30 -15 0 15 30 45 60 75 90 relative intensity (%) angular displacement (degrees) typical polar radiation pattern for blue and green typical polar radiation pattern for red -3 0 -6 0 60 30 -1 20%- 100% - 80% -6 0% -40% -2 0% 0% 20%4 0% 60%8 0% 10 0% 120% 30 60 -6 0 -3 0 -1 20%- 100% - 80% - 60% -40% -2 0% 0% 20%4 0% 60%8 0% 10 0% 120%
18 pds-001342rev 09 ? 2011 luminus devices, inc. - all rights reserved luminus devices, inc. ? t 978.528.8000 ? www.luminus.com 1100 technology park drive ? billerica, ma 01821 mechanical dimensions C SST-90 emitter SST-90 product datasheet for detailed drawing please refer to dwg-001359 documen
19 pds-001342rev 09 ? 2011 luminus devices, inc. - all rights reserved luminus devices, inc. ? t 978.528.8000 ? www.luminus.com 1100 technology park drive ? billerica, ma 01821 mechanical dimensions C SST-90 star board SST-90 product datasheet note 1: recommended mounting screw: m3 or #4 note 2: all dimensions in millimeters note 3: all anode pads on board are interconnected. all cathode pads on board are interconnected 1.4 typ 3.0 typ 16.1 solder pads 7.0 4.0 60 19.0 r 1.6 typ 19.9 typ 60 7.1 cathode pads anode pads
0 0 temperature (oc) time (sec) 30 60 90 120 150 180 210 240 270 300 25 50 75 100 125 150 175 200 225 250 note 1: temperatures are taken and monitored at the component copper layer. note 2: optimum profle may difer due to oven type, circuit board or assembly layout. note 3: recommended lead free, no-clean solder: aim nc254-sac305. note 4: refer to apn-001473 soldering and handling application note for additional solder profles and details. note 5: msl- level 2a solder profle 20 pds-001342rev 09 ? 2011 luminus devices, inc. - all rights reserved luminus devices, inc. ? t 978.528.8000 ? www.luminus.com 1100 technology park drive ? billerica, ma 01821 SST-90 product datasheet lead free solder guideline for low density boards solder profle stage lead-free solder lead-based solder profle length, ambient to peak 2.75 - 3.5 minutes 2.75 - 3.5 minutes time maintained above: temperature 217 oc 183 oc time maintained above: time 30 - 60 seconds 30 - 60 seconds cooldown rate 4o c/sec 4o c/sec cooldown duration 45 15 sec 45 15 sec sac 305 refow profle window for low density boards
21 pds-001342rev 09 ? 2011 luminus devices, inc. - all rights reserved luminus devices, inc. ? t 978.528.8000 ? www.luminus.com 1100 technology park drive ? billerica, ma 01821 SST-90 product datasheet (037<32&.(76 75$,/(5 pp32&.(762) 3&6 /2$'('32&.(76 2)(037<32&.(76 /($'(5 pp32&.(76 $ $ ) & % ' : ( '(7$,/$ 6&$/( 815((/,1*',5(&7,21 + /($'(5(1' 32&.(76 : : $ % ',0(16,216$5(,1pp,1&+ 815((/,1*',5(&7,21 5((/',0(16,216 $ : : % + 7$3(',0(16,216 : $% &' ( ) tape and reel drawing (part #) product datasheet
note 1: n2150 - denotes a bin kit comprising of all fux and chromaticity bins at the 6500k and 5700k color points gn450 - denotes a bin kit comprising of all fux and chromaticity bins at the 4500k and 4000k color points gm750 - denotes a bin kit comprising of all fux and chromaticity bins at the 3000k and 2700k color points 22 pds-001342rev 09 ? 2011 luminus devices, inc. - all rights reserved luminus devices, inc. ? t 978.528.8000 ? www.luminus.com 1100 technology park drive ? billerica, ma 01821 SST-90 product datasheet ordering part number 1,2 color description SST-90-wdls-f11-n2150 6500k white 5700k white white big chip led? SST-90 surface mount device consisting of a 9mm 2 led on ceramic substrate , tray pack SST-90-wcls-f11-gn450 4500k white 4000k white SST-90-wwrm-f11-gm750 3000k white 2700k white ssr-90-wdls-r11-n2150 6500k white 5700k white ssr-90 evaluation module consisting of a SST-90 surface mount device mounted on an aluminum star board ssr-90-wcls-r11-gn450 4500k white 4000k white ssr-90-wwrm-r11-gm750 3000k white 2700k white ordering information
the products, their specifcations and other information appearing in this document are subject to change by luminus devices without notice. luminus devices assumes no liability for errors that may appear in this document, and no liability otherwise arising from the application or use of the product or information contained herein. none of the information provided herein should be considered to be a representation of the ftness or suitability of the product for any particular application or as any other form of warranty. luminus devices product warranties are limited to only such warranties as accompany a purchase contract or purchase order for such products. nothing herein is to be construed as constituting an additional warranty. no information contained in this publication may be considered as a waiver by luminus devices of any intellectual property rights that luminus devices may have in such information. big chip leds? is a registered trademark of luminus devices, inc., all rights reserved. this product is protected by u.s. patents 6,831,302; 7,074,631; 7,083,993; 7,084,434; 7,098,589; 7,105,861; 7,138,666; 7,166,870; 7,166,871; 7,170,100; 7,196,354; 7,211,831; 7,262,550; 7,274,043; 7,301,271; 7,341,880; 7,344,903; 7,345,416; 7,348,603; 7,388,233; 7,391,059 patents pending in the u.s. and other countries. 23 pds-001342rev 09 ? 2011 luminus devices, inc. - all rights reserved luminus devices, inc. ? t 978.528.8000 ? www.luminus.com 1100 technology park drive ? billerica, ma 01821 SST-90 product datasheet ordering part number 1,2,3 color description SST-90-r-f11-hh100 red red SST-90 consisting of a 9 mm 2 led on a surface mount substrate SST-90-g-f11-jg200 green green SST-90 consisting of a 9 mm 2 led on a surface mount substrate SST-90-b-f11-kf300 blue blue SST-90 consisting of a 9 mm 2 led on a surface mount substrate ssr-90-r-r11-hh100 red red ssr-90 evaluation module consisting of a SST-90 surface mount device mounted on an aluminum star board ssr-90-g-r11-jg200 green green ssr-90 evaluation module consisting of a SST-90 surface mount device mounted on an aluminum star board ssr-90-b-r11-kf300 blue blue ssr-90 evaluation module consisting of a SST-90 surface mount device mounted on an aluminum star board note 1: hh100 - denotes a bin kit comprising of all red fux and wavelength bins as specifed on page 5 jg200 - denotes a bin kit comprising of all green fux and wavelength bins as specifed on page 5 kf300 - denotes a bin kit comprising of all blue fux and wavelength bins as specifed on page 5 note 2: for ordering information on all available bin kits, please see pds-001692: SST-90 binning & labeling document ordering information

▲Up To Search▲

Price & Availability of SST-90

	To Download SST-90 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .